PRODUCTS

Home » Products » SNT Radio Remote Controls » IT-405 / F24-60

IT-405 / F24-60

Master remote controls have two versions of the operating commands: digital up to 6-step joysticks, or analogical and proportional step-less joysticks. Analogical manoeuvers cab be adjusted by the operator from the transmitter, independently for each manoeuvres. The receiver has an LCD display reporting system status, providing greater safety and agility if anomalies are detected. It also has an RS-485 serial port which can be use to connect to PLC’s, robots, variators or any peripheral equipment that requires information through the serial port. It incorporates a multi-frequency, synthesized radio system that enables the operator to automatically change the working channel. These units accept several operation configurations depending on each application.

MASTER/SLAVE: Two transmitters control two receivers.
PITCH & CATCH: Two transmitters control one receiver.
DATA FEEDBACK: Bi-directional equipment.

TECHNICAL DATA

Number of Commands	Up to 40 commands
	DIGITAL/ANALOGICAL:14-4/22-8 + Start -Stop-Horn
Responding Time	<=50 ms
Active Emergency Responding Time	<50 ms
Passive Emergency Responding Time	1,900 ms
Operating Range Distance	200m /656 ft

Transmitter

Operating Range Frequency	UHF (865.000-867.000 MHZ)
	Other frequencies available.
	UHF (865.00 to 867.00 MHZ)
Channel Spacing	25 KHZ
Modulation	FM
RF Power Output	10mW A.R.P
Coding Key	FFSK
Transmitting Power Consumption	80mA
Standby Power Consumption	<800 µA
Operating Working time(20°C/68°F)	11 Hours + 30 Minutes after low – battery led flashes.
Battery Capacity and type	Ni-MH Battery 7.2V ,1500 mAh
Battery Weight	200g /0.44 lb
Casing Material	Polyamide 6-6 reinforced with 15% fiberglass
Transmitter Approx. Weight	1.5 Kg/3.30 lb
Indicator LEDs	Transmission Indicator and low-battery on separate LEDs.
Operating Commands	Two dual-axis fully proportional and analogical step-less joysticks or digital upto 6 steps (combinations available)
Protection Rating	Ip65

Receiver

RF Sensitivity	03 µV at 12 dB S/N
Outputs	DIGITAL: by relays 5 A 30 Vdc/5 A, 250 Vac with resistive load (Cos =1) Comm. Port Rs-485 ANALOGICAL: by tension:bipolar (0-5 Ø V, 5 V, 0-10 V, 10 V)and unipolar (2/4/6V, 3/6/9 V, 6/12/18 V), ±± other values adjustable from the transmitter by the operator
Power Requirements	48VAC/110VAC/230VAC (available 24 Vdc/12 Vdc)
Display	LCD display matrix 2 x 16 reporting system status
Consumption 16 relays	0.14 A at 230Vac/0.29 A at 110 Vac/0.7 A at 48 Vac
32 relays	0.18 A at 230Vac/0.35 A at 110 Vac/0.9 A at 48 Vac
Casing Material	Polyamide 6-6 reinforced with 30% fiberglass
Dimensions 21 relays	255 x 200 x 95 mm/10.04 x 7.87 x 3.74 in
up to 40 relays	315 x 235 x 120 mm/12.40 x 9.25 x 4.72 in
Weight	2.8 Kg (6×17 lb) (16 relays) / 4.2 kg (9.48 lb) (32 relays)
Protection rating	Ip65
Ambient Temperature	-20 C to 70°C

Battery Charger

Power requirements	230 Vac (Optional 110 Vac)
Dimensions	73 x 69 x 72 mm/2.87 x 2.71 x 2.83 in
Battery Charging time	4-6 hours
Temperature	0°C to 40°C /32° F to 104° F
Weight	200g/0.44 lb

Home » Products » SNT Radio Remote Controls » IT-405 / F24-60

IT-405 / F24-60

TECHNICAL DATA

Number of Commands	Up to 40 commands
	DIGITAL/ANALOGICAL:14-4/22-8 + Start -Stop-Horn
Responding Time	<=50 ms
Active Emergency Responding Time	<50 ms
Passive Emergency Responding Time	1,900 ms
Operating Range Distance	200m /656 ft

Transmitter

Operating Range Frequency	UHF (865.000-867.000 MHZ)
	Other frequencies available.
	UHF (865.00 to 867.00 MHZ)
Channel Spacing	25 KHZ
Modulation	FM
RF Power Output	10mW A.R.P
Coding Key	FFSK
Transmitting Power Consumption	80mA
Standby Power Consumption	<800 µA
Operating Working time(20°C/68°F)	11 Hours + 30 Minutes after low – battery led flashes.
Battery Capacity and type	Ni-MH Battery 7.2V ,1500 mAh
Battery Weight	200g /0.44 lb
Casing Material	Polyamide 6-6 reinforced with 15% fiberglass
Transmitter Approx. Weight	1.5 Kg/3.30 lb
Indicator LEDs	Transmission Indicator and low-battery on separate LEDs.
Operating Commands	Two dual-axis fully proportional and analogical step-less joysticks or digital upto 6 steps (combinations available)
Protection Rating	Ip65

Receiver

RF Sensitivity	03 µV at 12 dB S/N
Outputs	DIGITAL: by relays 5 A 30 Vdc/5 A, 250 Vac with resistive load (Cos =1) Comm. Port Rs-485 ANALOGICAL: by tension:bipolar (0-5 Ø V, 5 V, 0-10 V, 10 V)and unipolar (2/4/6V, 3/6/9 V, 6/12/18 V), ±± other values adjustable from the transmitter by the operator
Power Requirements	48VAC/110VAC/230VAC (available 24 Vdc/12 Vdc)
Display	LCD display matrix 2 x 16 reporting system status
Consumption 16 relays	0.14 A at 230Vac/0.29 A at 110 Vac/0.7 A at 48 Vac
32 relays	0.18 A at 230Vac/0.35 A at 110 Vac/0.9 A at 48 Vac
Casing Material	Polyamide 6-6 reinforced with 30% fiberglass
Dimensions 21 relays	255 x 200 x 95 mm/10.04 x 7.87 x 3.74 in
up to 40 relays	315 x 235 x 120 mm/12.40 x 9.25 x 4.72 in
Weight	2.8 Kg (6×17 lb) (16 relays) / 4.2 kg (9.48 lb) (32 relays)
Protection rating	Ip65
Ambient Temperature	-20 C to 70°C

Battery Charger

Power requirements	230 Vac (Optional 110 Vac)
Dimensions	73 x 69 x 72 mm/2.87 x 2.71 x 2.83 in
Battery Charging time	4-6 hours
Temperature	0°C to 40°C /32° F to 104° F
Weight	200g/0.44 lb

DEUS RRC PVT. LTD.

PRODUCTS

IT-405 / F24-60

TECHNICAL DATA

Transmitter

Receiver

Battery Charger

IT-405 / F24-60

TECHNICAL DATA

Transmitter

Receiver

Battery Charger

Quick Links

Catalogue

Address

WELCOME TO

DEUS RRC PVT. LTD.

SNT SYSTEMS PVT. LTD.