IT 401/402 is suitable for four motion EOT cranes.
IT 401 consists of ten single step push buttons plus start and stop push buttons.
IT 402 is with ten dual step push buttons plus start and stop button.
It 401/402 can be configured with RX-L receivers. The relay configuration is fully programmable and can be offered as per customer requirements.
| Number of Commands | Up to 20 + Start/Horn + Stop |
| Hamming Distance | >=6 |
| Responding Time | <24 ms |
| Active Emergency Responding Time | <24 ms |
| Operating Range Distance | 100m |
| Number of Commands | Up to 20 + Start/Horn + Stop |
| Operating Range Distance | 100m |
| Operating Range Frequency | UHF (310.00 to 336.00 MHZ) |
| UHF (433.05 to 434.775 MHZ) | |
| UHF (865.00 to 867.00 MHZ) | |
| Channel Spacing | 25 KHZ |
| Modulation | FM |
| RF Power Output | 10mW |
| Coding Key | FFSK |
| Transmitting Power Consumption | <15mA |
| Standby Power Consumption | <1mA |
| Battery Capacity and Type | 2AA size alkaline battery each of 1.6V |
| Operating Temperature | – 20°C to + 70°C |
| Transmitter Approx. Weight | 300 grams (Without Battery) |
| Dimension | 195mm(H)x 50mm(W) x50mm(B) |
| Protection Rating | IP65 |
| RF Sensitivity | 0.6mV |
| Number of Relays | 21 potential relays |
| Relays | Resistive Load: 5A at 230 VAC or 30 VDC |
| Control Volatges | 48VAC/110VAC/230VAC |
| Display | By Means of LEDs |
| Maximum Power Requirement | 100VA |
| Dimensions | 270mm(H)x 200mm (B) x 90mm(W) |
| Weight | Approx x 1.8 kg |
| Protecting Rating | IP 65 |
| Number of Commands | Up to 20 + Start/Horn + Stop |
| Hamming Distance | >=6 |
| Responding Time | <24 ms |
| Active Emergency Responding Time | <24 ms |
| Operating Range Distance | 100m |
| Number of Commands | Up to 20 + Start/Horn + Stop |
| Operating Range Distance | 100m |
| Operating Range Frequency | UHF (310.00 to 336.00 MHZ) |
| UHF (433.05 to 434.775 MHZ) | |
| UHF (865.00 to 867.00 MHZ) | |
| Channel Spacing | 25 KHZ |
| Modulation | FM |
| RF Power Output | 10mW |
| Coding Key | FFSK |
| Transmitting Power Consumption | <15mA |
| Standby Power Consumption | <1mA |
| Battery Capacity and Type | 2AA size alkaline battery each of 1.6V |
| Operating Temperature | – 20°C to + 70°C |
| Transmitter Approx. Weight | 300 grams (Without Battery) |
| Dimension | 195mm(H)x 50mm(W) x50mm(B) |
| Protection Rating | IP65 |
| RF Sensitivity | 0.6mV |
| Number of Relays | 21 potential relays |
| Relays | Resistive Load: 5A at 230 VAC or 30 VDC |
| Control Volatges | 48VAC/110VAC/230VAC |
| Display | By Means of LEDs |
| Maximum Power Requirement | 100VA |
| Dimensions | 270mm(H)x 200mm (B) x 90mm(W) |
| Weight | Approx x 1.8 kg |
| Protecting Rating | IP 65 |
For viewing our complete range of products for industrial crane applications, please find the catalog for all our products below.
